5" Sch 40 PVC Cap Soc 447-050

This 5" Sch 40 cap is made to fit onto a 5" pipe with an OD of 5.563".

This cap weighs about 1.5 lb. The 5" sizes are really uncommon, so we only have it in PVC, not DWV, which will weigh a little less than PVC.

I'm not sure if you can use 4", but it would weigh 0.8 lb in PVC (part 447-040). The 4" is also available in DWV, which is slightly less weight at 0.6 lb (part P116-040).

These weights can vary by manufacturer, so just ensure that you call after ordering and specify that you need Spears, if you order them in PVC (we only carry Spears for DWV).

The associated with a fitting tells you what the fitting pairs with, not the size of the fitting itself. You must also look at the end type. Since this fitting has a socket end, it fits OVER pipe with the same size label. Therefore, the ID of this fitting with be the same as the OD of the pipe it pairs with (5" pipe), which is about 5.563".

The OD, or outside diameter, of this 5" schedule 40 PVC cap is approximately 6-1/8 inches.