DWV Bends

  • Use to change pipeline direction in DWV line • ASTM D 3311, 1866, 1784 Standards
  • Different degree bends available: 1/4, 1/6, 1/8, 1/16 • NSF International Standard 14 Certified
  • Maximum Operating Temp of 140°F • Various sizes and end types available

Items 1 to 18 of 104 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 18 of 104 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

There are many different styles of DWV bends. All our DWV fittings are made of PVC, making them resistant to corrosion and able to handle a wide variety of material types. Some of these bend styles are 1/4 bends (which are similar to 90 degree elbows), 1/6 bends (which are similar to 60 degree elbows), 1/8 bends (similar to 45 degree elbows), 1/16 bends (similar to 22.5 degree elbows), and U style bends. In addition to the angle of the bend, fittings can differ in special features like a side inlet or long sweep feature.

Long sweep bends are like standard DWV PVC bends, but as their name implies, they create a longer bend. That means they take up more space and offer a more gradual bend for materials passing through. Some bends also have inlets in the side or heel of the fitting. These allow material to enter the pipe line from two directions. Sort through our huge selection of DWV bends by degree of bend or special type. As always, you can also sort by size of the fitting. Our bends go up to 14" in size! See our DWV PVC supplies and get everything you need for your next job for less.