Clear PVC Elbows

An ell is the fitting of choice when you need to change the direction of flow. These clear PVC ells will change the flow from at a 90 degree or 45 degree angle. This allows you to run a system around obstacles or direct flow to a different part of your building. By using clear PVC ells, you can be certain that the fluid inside your system is not getting contaminated.

Items 1 to 18 of 46 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3

Items 1 to 18 of 46 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3

Clear PVC ells are made in a variety of configurations. You can choose ells with two slip ends or ells with a spigot and slip end, depending on your needs. This will allow you to perfectly match your existing system or the pipes you are using to create a new system. With slip ends, an adhesive can be used to create a tight seal, or they can be left without an adhesive to allow for quick access when needed. These clear PVC ells are made from durable schedule 40 PVC, so they will withstand ongoing exposure to corrosive chemicals. Because these ells come from the industry's leading manufacturer of clear PVC, you will not notice a harsh dark blue tint to these products. They are as clear as possible with only a slight blue tint so you will not have to compensate for a slight color to the materials. This makes these clear PVC ells the industry's leader for clean rooms and other systems where clarity is essential and the harsh blue tint common with inferior products would hinder that clarity.

Clear PVC ells are available in a range of diameters from 1/4 inch to 8 inches to meet your specific needs. All clear PVC schedule 40 ells meet ASTM D1784 and NS14-14 standards. Because they are schedule 40 PVC, they have a maximum working temperature of 140 degrees. This makes them ideal for most situations that will not be transporting high temperature liquids.