It is a universal fact of life that tiles are hard to clean. This is especially true of the grout between tiles. Nasty grime and gunk seems to get stuck there in abnormally large amounts. Cleaning tile and ground effectively is difficult, as it relies you having a tool that is strong enough to get the leverage you need. A long handle is extremely helpful, but many store-bought cleaning tools are too flimsy to hold up to extended use. Make your own tough DIY PVC tiles cleaner pad to get this annoying job done quick and effectively!
Using just a few inexpensive materials, you can make this DIY tile cleaner with a handle that is long enough to avoid getting bathroom debris on your hands. This durable DIY PVC tile cleaner utilizes a simple scouring pad, which you would usually use for your dishes. This means the pad is easy to replace! Read the full guide, based on a build by Instructables, below.
Materials and Tools:
This small DIY tiles cleaner pad project only requires a few materials, most of which are inexpensive. Order the linked items from our online store for the lowest prices anywhere! Materials and tools you will need are as follows:
- 3/4" Sch. 40 PVC Pipe - 8"
- 3/4" Sch. 40 PVC Tee - 1
- 3/4" Sch. 40 PVC 90-Degree Elbow - 1
- PVC Cement
- 1/2" PEX Piping - 2"
- Scouring Pad - 1
- 1/2" Screws - 2
- Measuring Tape
- Hacksaw
- Screwdriver / Screw Gun
- Sandpaper
Step 1: Cut Pipes and Fitting
You will be hard-pressed to find PEX or PVC pipe in lengths shorter than 5 feet, so you will need to cut the proper lengths out of the large pieces. Use your measuring tape to measure 2" on your PEX and 8" on your PVC. Using your hacksaw, cut the PVC to the appropriate length. You may need a utility knife to cut the PEX, as it is more flexible.
Next, you will need to cut a space in the tee fitting, as shown in the picture below. The space should be around 1/2" across. Also, measure 3/8" from the end on each side of the tee so your scouring pad will stick out on the sides. Measure and make cuts with your hacksaw.
Step 2: Attach Pad
To attach the scouring pad, fold it around your 2" section of PEX tubing. This is what your screws will attach to. Slide the PEX, wrapped in scouring pad, into the side of the tee. The ends of the scouring pad should stick out of the gap you cut earlier.
Once the pad and PEX are inside the tee fitting, insert screws through the back of the tee and into the PEX piece inside. This will hold it secure and ensure you can scrub as hard as you need without loosening the pad.
Step 3: Build Structure
This DIY PVC tiles cleaner pad has a very straightforward structure. The PVC pipe is simply placed between the elbow and the tee. Make sure everything fits correctly before applying PVC cement. The glue is important because this tool will be under significant stress. You don't want it falling apart all the time. PVC cement makes a strong bond that sets quickly, so this step will not take long. Apply a thin layer on the inside of the fitting, where it will touch the pipe, then insert the pipe.
You now have a sturdy and reliable DIY PVC tile cleaner with a replaceable pad. This cleaner should hold up better than flimsy, breakable cleaners you can get from the store! For all of your PVC supply needs, visit our online store at PVCFittingsOnline.com!
